Formulation of White Phenyl – Pine Oil Disinfectant

AUChemicals logo


The ingredients required for making Formulation of White Phenyl – Pine Oil Disinfectant are Pine oil, Turkey Red Oil (TRO), Fragrance, Water.



WHITE PHENYL – PINE OIL DISINFECTANT FORMULATION

Pine oil1.5%
Turkey Red Oil (TRO)1%
Fragrance0.5%
Water97%


Equipments Needed:

  1. Drum/Container/Vessel (in which all materials are going to be mixed)
  2. Agitator (Mixer connected with motor to mix the raw materials)
  3. Mass balance


Equipments Setup:

  • The Drum/Container/Vessel should be placed on horizontal surface.
  • The Agitator or impeller attached with the motor should be inside that container and the height from bottom of the container should be kept as minimum to impose proper mixing.


Manufacturing Steps:

There are two steps for manufacturing of white phenyl.

  1. Making of Phenyl Base
  2. Addition of Water

1.Making of Phenyl Base

This process is the main step for making white phenyl. We are going to make such chemical that when added to water forms a stable emulsion of oil and water. Our oil in white phenyl making is pine oil. Pine oil needs an emulsifier to remain stable in water. Therefore, we add Turkey Red Oil (TRO) in Pine oil to make phenyl base.

  • Take 1% Turkey Red Oil in the mixing vessel.
  • Run the agitator or mixer to start mixing.
  • Now, start adding Pine oil slowly into Turkey Red Oil (TRO).
  • The amount of Pine oil added would be 1.5% of Pine oil in total white phenyl
  • The Phenyl base formed would be of mild brown color and homogeneous. Solution appears to be transparent type. It means you may see the things from inside of the solution to other side.

2. Addition of Water

This process is as simple as to dilute the phenyl base in water. But one PRECAUTION is required. Addition of 97% water should take place in the following matter.


TIP: In the prepared phenyl base present in mixing vessel, add the equal amount of water slowly. Allow to mix for certain time until a homogeneous white color paste forms. Then, the remaining amount of water can be added.


In the last step, add fragrance of your choice. preferably lemon flavored or jasmine flavored does the job very well.


PRECAUTION: You may add water directly to the phenyl base but that may cause you the problem of some precipitates in your white phenyl that is not pleasant to have.



IF YOU NEED ANY OF THE CHEMICAL MENTIONED ABOVE, YOU MAY BUY HERE:

BUY now AUChemicals
Subscribe AUChemicals

Please follow and like us:

Leave a Reply

Your email address will not be published. Required fields are marked *

error

Enjoy this blog? Please spread the word :)